Fabric Inspection Machine

Product Details:

PARAMOUNT Check MASTER™ PR + R + P i9 has a Wide viewing area to check the fabric thoroughly. It has Dual Light Sources: TOP Illumination to check the Dyeing and Printing Defects and Bottom Illumination to check the Weaving Defects Forward & reverse motion facility is provided to enable effective inspection. The Length of the Fabric inspected is directly displayed by the Length Counter. The Digital fault counter helps in counting the number of defects in the fabric. Emergency stop switch is provided to stop the machine suddenly in case of an emergency. The machine is elegantly finished in Blue and Grey Powder coating paint for impressive looks.

• Ergonomically designed Advanced Fabric Inspection machine for Batching, Perfect Rolling and Plaiting.
• Highly suitable for Automobile and Footwear Industry to check light, heavy, Non-woven or padded fabrics.
• It makes perfectly aligned Rolls at the back of the operator for convenience and ease in inspection.
• It can also take Batch Trolleys from back for continuous inspection.
• The Plaiting device makes Plaits at the back.
• Suitable for Fabric Manufacturing Mills and Dyeing & Process Houses.
• Multiple Geared Motors along with advanced Programmable AC Frequency Drives are used for smooth running of the Fabrics.
• Geared motor and advanced frequency drive also for edge alignment unit.
• Two Modes of operation :  Continuous and Inching Facility.
• Light from TOP and BOTTOM to identify all type of Defects : Weaving, Dyeing and Printing Defects.
• Roller Type Length counter for accurate fabric length measurement.
• Digital fault counter to keep count of Faults in the Fabric.
• Working with Both Length and Fault counters the operator can easily keep note of all the faults and also know at which length the fault are coming. 
• A special Tensioning device is provided to provide adjustable tension to the fabric during Inspection.
• With Emergency Stop facility to stop the machine at any time , as per the Safety and CE Norms.
• Complete with all accessories-tray for keeping loose fabrics, plastic pipes for rolling fabrics etc.
• Supplied with calibration & inspection certificates.

• MLUTIPLE Special Geared Motors : To Run the Fabric Smoothly
• Special Geared Motor : To operate the Edge Alignment Unit.
• MULTIPLE Frequency Drive :  Electronic Programmable Drive to Run the Fabric
• Frequency Drive ALSO : To Run the Edge Alignment Unit.
• Photo Sensors : To operate Edge Guiding System.
• BIG ROLLERS :  5 Nos. for smooth running of the Fabric.
• Small Stainless Steel Roller :  4 Nos. for smooth passage of the Fabric
• Emergency Stop : In Front and Back side adhering to Safety Norms.
• Power Supply : 220/230 V, 50 Hz, Single phase AC Supply
• Maximum Width : 72” Inches of fabric can be checked
• Light source  : LED Lights at Top & Bottom for Illumination
• Length Counter :  Wheel Type, 0 – 99999 Meters (Least count 0.1 M)
• Fabric movement :  Back to Front/ Front to Back

STANDARD ACCESSORIES

1. Main Unit  : 1 No.
2. PVC Pipes  : 2 Nos.
3. User’s Manual : 1 No.
4. Calibration Conformance Certificates : 1 No.
5. Inspection & Conformance Certificate : 1 No.

Additional Information:

• Production Capacity: 10 Machines a month
• Delivery Time: 4 weeks
• Packaging Details: Nicely packed in cardboard &

Product Details:

Additional Information:

• Delivery Time: 3 Weeks
• Packaging Details: To ensure that the material reaches you safely and in perfectly OKAY condition

Product Details:

OVERVIEW 

PARAMOUNT Check MASTER BSR i9  is designed to Inspect and make fabric rolls simultaneously. It has a Wide viewing area to check the fabric thoroughly. It has Dual Light Sources : TOP Illumination to check the Dyeing and Printing Defects and Bottom Illumination to check the Weaving Defects. It also has a Tensioning device to provide tension to the fabric during movement. The checking speed can be controlled with the controlling knob. Forward & reverse motion facility is provided to enable effective inspection. The Length of the Fabric inspected is directly displayed by the Length Counter. The Digital fault counter helps in counting the number of defects in the fabric. Emergency stop switch is provided to stop the machine suddenly in case of an emergency. The machine is elegantly finished in Blue and Grey Powder coating paint for impressive looks.

SALIENT FEATURES

• An economical, ergonomically designed, Fabric Inspection machine.
• Latest Technology Equipment with modern Aesthetics which can do Rolling on both Front and back Side.
• Sturdy Geared Motor with variable speed control thru AC Frequency Drive.
• Two Modes of Inspection : Continuous or Inching facility.
• Light from TOP and BOTTOM to identify all type of Defects : Weaving, Dyeing and Printing Defects.
• Roller Type Length counter for accurate fabric length measurement.
• Digital fault counter to keep count of Faults in the Fabric.
• Working with Both Length and Fault counters the operator can easily keep note of all the faults and also know at which length the fault are coming. 
• A special Tensioning device is provided to provide adjustable tension to the fabric during Inspection.
• With Emergency Stop facility to stop the machine at any time , as per the Safety and CE Norms.
• Complete with all accessories-tray for keeping loose fabrics, plastic pipes for rolling fabrics etc.
• Supplied with calibration & inspection certificates.

• Special Designed Geared Motor: To Run the Fabric smoothly

• Frequency Drive:  Electronic Programmable Drive to Run the Fabric
• BIG ROLLERS:  5 Nos. for smooth running of the Fabric.
• Small Stainless Steel Roller:  4 Nos. for smooth passage of the Fabric
• Emergency Stop: In Front and Back side adhering to Safety Norms.
• Power Supply: 220/230 V, 50 Hz, Single phase AC Supply
• Maximum Width : 72 Inches of fabric can be checked
• Light source: LED Lights at Top & Bottom for Illumination
• Length Counter:  Wheel Type, 0  99999 Meters (Least count 0.1 M)
• Fabric movement:  Back to Front/ Front to Back
• Overall Dimensions of the unit: 
• Length     Depth               Height
• 2260mm     1480mm      1810 mm
• 89 Inch    58Inch   71 Inch
• Net Weight      :  450 Kg (990 lbs)

Additional Information:

• Production Capacity: 50 Units/ Month
• Delivery Time: 3 Weeks
• Packaging Details: Beautiful Wooden Packing

Product Details:

OVERVIEW

PARAMOUNT Check MASTER EPIC i9 has a Wider viewing area to check the fabric thoroughly. It has Dual Light Sources : TOP Illumination to check the Dyeing and Printing Defects and Bottom Illumination to check the Weaving Defects Forward & reverse motion facility is provided to enable effective inspection. The Length of the Fabric inspected is directly displayed by the Length Counter. The Digital fault counter helps in counting the number of defects in the fabric. Emergency stop switch is provided to stop the machine suddenly in case of an emergency. The machine is elegantly finished in Blue and Grey Powder coating paint for impressive looks. 
SALIENT FEATURES

• Ergonomically designed highly Advanced Fabric Inspection machine for Batching, Perfect Rolling, Plaiting, Cutting and Weighing of Rolls.
• With advanced Controls it can inspect Woven, Non-Woven, Knitted, Elastic, Lycra, Coated Fabrics, PVC Leather and Home Furnishing Fabrics. 
• Highly suitable for Bulk inspection in Weaving MILLS and Fabric distributors.
• It makes perfectly aligned Rolls at the back of the operator for convenience and ease in inspection.
• It can also take Batch Trolleys from back for continuous inspection.
• Enhanced system of Fabric Plaiting either in the Front or at the back as per the buyers requirement.
• Advanced feature of accurate weighing of each Roll after inspection and Cutting.
• Multiple Geared Motors along with advanced Programmable AC Frequency Drives are used for smooth running of the Fabrics.
• Geared motor and advanced frequency drive also for edge alignment unit.
• Two Modes of Inspection : Continuous or Inching facility.
• Light from TOP and BOTTOM to identify all type of Defects : Weaving, Dyeing and Printing Defects.
• Roller Type Length counter for accurate fabric length measurement.
• Digital fault counter to keep count of Faults in the Fabric.
• Working with Both Length and Fault counters the operator can easily keep note of all the faults and also know at which length the fault are coming. 
• A special Tensioning device is provided to provide adjustable tension to the fabric during Inspection.
• Three Emergency Switches are provided at various locations to STOP the machine at any time, as pr SAFETY and CE Norms.
• Complete with all accessories-tray for keeping loose fabrics, plastic pipes for rolling fabrics etc.
• Supplied with calibration & inspection certificates. 

• MULTIPLE Special Geared Motors: To Run the Fabric Smoothly
• Special Geared Motor: To operate the Edge Alignment Unit.
• MULTIPLE Frequency Drive:  Electronic Programmable Drive to Run the Fabric
• Frequency Drive ALSO: To Run the Edge Alignment Unit.
• Photo Sensors: To operate Edge Guiding System.
• BIG ROLLERS:  5 Nos. for smooth running of the Fabric.
• Small Stainless Steel Roller:  4 Nos. for smooth passage of the Fabric
• Emergency Stop: In Front and Back side adhering to Safety Norms.
• Power Supply: 220/230 V, 50 Hz, Single phase AC Supply
• Maximum Width: 72 Inches of fabric can be checked
• Light source: LED Lights at Top & Bottom for Illumination
• Length Counter:  Wheel Type, 0  99999 Meters (Least count 0.1 M)
• Fabric movement:  Back to Front/ Front to Back
• Overall Dimensions:Length Depth Height
•   210 Inch X 125 Inch X 105 Inch
• Net Weight:1620 Kg (3560lbs)                                                     

Additional Information:

• Delivery Time: 3 Weeks
• Packaging Details: To ensure that the material reaches you safely and in perfectly OKAY condition

Product Details:

OVERVIEW -

Fabric is the most valuable resource Fabric for a Garment as it  about 60% - 70% of the total cost of a finished Garment. Hence its important that it must be checked properly to avoid rejections and cost overruns due to faults in the fabric.  And the Knitted and Lycra fabric is little difficult to inspect as it gets elongated when it is pulled.  To Inspect Knitted and Lycra Fabrics conveniently and to  control the fabric Quality, Paramount has introduced, its latest Fabric Inspection Machine, Check MASTER™ BSR KNITTED i9. This Equipment with its special Unwinding Roller placed at various locations helps in easy movement and also in removing the crease in the fabric while inspection.  This machine increases the productivity about 10 TIMES,  as compared to the Manual Fabric Inspection.  It’s a very Convenient equipment with which thousands of meters of fabric, up to a width of  72” can be conveniently inspection, measured and rolled in a single day. 
PARAMOUNT Check MASTER™ BSR KNITTED i9 is designed to Inspect and make fabric rolls of Knitted and Lycra Fabrics.   It has a Wide viewing area to check the fabric thoroughly. It has Dual Light Sources : TOP Illumination to check the Dyeing and Printing Defects and Bottom Illumination to check the Weaving Defects. Forward & reverse motion facility is provided to enable effective inspection. The Length of the Fabric inspected is directly displayed by the Length Counter. The Digital fault counter helps in counting the number of defects in the fabric. Emergency stop switch is provided to stop the machine suddenly in case of an emergency. The machine is elegantly finished in Blue and Grey Powder coating paint for impressive looks.

SALIENT FEATURES - 

• Highly Suitable to check the Knitted, Lycra and Stretch Fabric Rolls.
• Latest Technology Equipment with modern Aesthetics.
• Three Special Uncurling Rolls opens up the curls in the fabric. 
• Two Modes of Inspection : Continuous or Inching facility.
• Light from TOP and BOTTOM to identify all type of Defects : Weaving, Dyeing and Printing Defects.
• Roller Type Length counter for accurate fabric length measurement.
• Digital fault counter to keep count of Faults in the Fabric.
• Working with Both Length and Fault counters the operator can easily keep note of all the faults and also know at which length the fault are coming. 
• A special Tensioning device is provided to provide adjustable tension to the fabric during Inspection.
• With Emergency Stop facility to stop the machine at any time , as per the Safety and CE Norms.
• Complete with all accessories-tray for keeping loose fabrics, plastic pipes for rolling fabrics etc.
• Supplied with calibration & inspection certificates.

TECHNICAL SPECIFICATIONS - 

• Uncurling Roller :  3 Nos.
• Special Geared Motor : To Run the Fabric
• Special Motor : To Run the Uncurling Rollers in Alignment.
• Frequency Drive :  Electronic Programmable Drive to Run the Fabric
• 2^nd. Frequency Drive : To Run Uncurling Roller thru Motor & Gears.
• BIG ROLLERS :  5 Nos. for smooth running of the Fabric.
• Small Stainless Steel Roller :  4 Nos. for smooth passage of the Fabric
• Emergency Stop : In Front and Back side adhering to Safety Norms.
• Power Supply : 220/230 V, 50 Hz, Single phase AC Supply
• Maximum Width : 72” Inches of fabric can be checked
• Light source  : LED Lights at Top & Bottom for Illumination
• Length Counter :  Wheel Type, 0 – 99999 Meters (Least count 0.1 M)
• Fabric movement :  Back to Front/ Front to Back

Product Details:

OVERVIEW - 
PARAMOUNTCheckMASTER B + PR i9™ has a Wide viewing area to check the fabric thoroughly. It has Dual Light Sources : TOP Illumination to check the Dyeing and Printing Defects and Bottom Illumination to check the Weaving Defects Forward & reverse motion facility is provided to enable effective inspection. The Length of the Fabric inspected is directly displayed by the Length Counter. The Digital fault counter helps in counting the number of defects in the fabric. Emergency stop switch is provided to stop the machine suddenly in case of an emergency. The machine is elegantly finished in Blue and Grey Powder coating paint for impressive looks.

SALIENT FEATURES

• Ergonomically designed Fabric Inspection machine to make perfectly aligned Rolls at the back of the operator for convenience and ease in inspection.
• It can also take Batch Trolleys from back for continuous inspection.
• Suitable for Fabric Manufacturing Mills and Dyeing & Process Houses.
• Double Geared Motor along with advanced Programmable AC Frequency Drives for smooth running of the Fabrics.
• It also has another geared motor and advanced frequency drive for edge alignment unit.
• Two Modes of Inspection : Continuous or Inching facility.
• Light from TOP and BOTTOM to identify all type of Defects : Weaving, Dyeing and Printing Defects.
• Roller Type Length counter for accurate fabric length measurement.
• Digital fault counter to keep count of Faults in the Fabric.
• Working with Both Length and Fault counters the operator can easily keep note of all the faults and also know at which length the fault are coming. 
• A special Tensioning device is provided to provide adjustable tension to the fabric during Inspection.
• With Emergency Stop facility to stop the machine at any time , as per the Safety and CE Norms.
• Complete with all accessories-tray for keeping loose fabrics, plastic pipes for rolling fabrics etc.
• Supplied with calibration & inspection certificates.

TECHNICAL SPECIFICATIONS

• Two Special Geared Motor : To Run the Fabric Smoothly
• 3^rd. Special Geared Motor : To operate the Edge Alignment Unit.
• Two Frequency Drive :  Electronic Programmable Drive to Run the Fabric
• 3^rd. Frequency Drive : To Run the Edge Alignment Unit.
• Photo Sensors : To operate Edge Guiding System.
• BIG ROLLERS :  5 Nos. for smooth running of the Fabric.
• Small Stainless Steel Roller :  4 Nos. for smooth passage of the Fabric
• Emergency Stop : In Front and Back side adhering to Safety Norms.
• Power Supply : 220/230 V, 50 Hz, Single phase AC Supply
• Maximum Width : 72” Inches of fabric can be checked
• Light source  : LED Lights at Top & Bottom for Illumination
•  Length Counter :  Wheel Type, 0 – 99999 Meters (Least count 0.1 M)
• Fabric movement :  Back to Front/ Front to Back

1. Main Unit  : 1 No.
2. PVC Pipes  : 2 No.
3. User’s Manual : 1 No.
4. Calibration Conformance Certificates : 1 No.
5. Inspection & Conformance Certificate : 1 No.