Footwear Testing Instruments

Product Details:

OVERVIEW

De- Mattia Flex Tester has 6 set of grips to hold test specimens in two tiers with their holding faces lying in the same vertical plane. Holding one end of the test specimen in a fixed grip and the other end in a reciprocating grip provides the flexing and un flexing action.

Paramount De Mattia - Upper Flex Master i9™ is an ergonomically designed Equipment with sturdy mechanism to get Accurate & Reliable Results. It is used for the Assessment of flex crack resistance- Assess the overall appearance, considering all visible factors such as wrinkling, cracking, flaking and discoloration.

SALIENT FEATURES

• To Determine the bending resistance of Rubber, Leather, Synthetic Leather (Artificial Leather), Shoe Soles etc.
• The equipment is useful to measure the ­flex Cracking Resistance (Resistance to Cracking and Crack growth degree) by repeatedly ­flexing in specified times and Strokes.
• Sturdy & Ergonomic Equipment for Accurate & Reliable Results.
• 6 Samples can be tested at a time
• Precision Engineered components for continuous operations
• Adheres to National & International Standards
• Ergonomically designed with modern aesthetics.

STANDARD ACCESSORIES :

1. Main Unit                                                        : 01 No.
2. Dust Cover                                                       : 01 No.
3. Detailed User's Manual                                : 01 No.
4. Inspection & Conformance Certificate        : 01 No.

TECHNICAL SPECIFICATIONS

• Number of test specimens tested: 6
• Maximum opening between grips: 70 mm ± 1mm
• Minimum opening between grips: 12.5 ± 0.5 mm
• Travel of reciprocating grip: 57.5mm
• Flexing frequency: 300cpm
• Motor: ½ HP single phase 230 V AC
• Size of test specimen: 37.5 mm x 125 mm.
• Overall Dimensions: LENGTH x  DEPTH x HEIGHT                                          665mm x 400mm x 570mm    26.1” x 15.7” x 22.4”
• Net Weight of the Instrument: 108 kg (238 lb.)

 

Product Details:

OVERVIEW

ADIN Abrasion Tester determines the resistance of Elastomers in regard with the frictional loss on Rubber product such as footwear, tyres, conveyor belts ,hoses ,floor covering etc. As the wear is always the result of abrasion ,hence it simulates long term wear effectively .This tester is designed and manufactured in accordance with DIN standard. It is used for uniformity tests and comparison tests of rubber abrasion. Abrasive paper is wound on the surface of a rotary drum and rubber specimen subjected to load is moved on the abrasive paper. The amount of rubber reduced in the specimen due to the abrasion is measured.

PARAMOUNT DIN Abrasion Master i9™ is Next Generation equipment made exactly as per International standards . The Equipment allows user to measure the abrasion resistance of rubbers (vulcanized thermo-set rubbers and thermoplastic elastomers) that are subject to abrasive/frictional wear in their actual service, such as tires, conveyor drive belts, and shoe soles. The abrasion distance is easily selected by an adjusting screw. The constant pressure on the sample is set by using a variety of loading weights. If the test requires   sample to be rotated around its own axis, this rotation is easily activated by the operator.

SALIENT FEATURES

• To Determine the Wear performance, by Abrasive Paper, of Shoe Soles, Rubber, Tires, Conveyor Belts, Plastics etc., on a rotary drum, on which specified grade Sand Abrasive Paper is fixed, under specified Load.
• Sturdy & Ergonomic Equipment for Accurate & Reliable Results.
• Precision Engineered components for continuous operations
• Adheres to National & International Standards

STANDARD ACCESSORIES

1. Main unit :  1 No.
2. Weight (2.5n):  1 No.
3. Weight (5N):  1 N0.
4. Spanner (20mm or 30mm):  2 No.
5. Stander cutting die  :  1 No.
6. Screwdriver:  1 No.
7. Metal blob(grinding head)  :  1No.
8. Detailed User Manual : 1 No.

TECHNICAL SPECIFICATIONS

• Main on/off Switch:  Rocker type
• Power supply:  single phase ,220v AC
• Diameter of cylinder:  150 ±0.2mm
• Length of cylinder: 460mm
• Rotation speed : 40rpm
• Holder moving distance: 4.2mm each rotation
• Standard : IS3400(Part 3)-212
• Load weight: 5N,10N
• Motor: 40rpm 1/4hp
• Travelling Area: 84 Rotation ±2 Rotation
• Power Supply: 220V, Single Phase 50 Hz.(Also available 110V, Single Phase 60 Hz)
• Overall Dimension (Net): LENGTH x DEPTH x HEIGHT                                         755 mm x 305mm x 450mm                              
• Weight: 55 kg (121 lbs.) 

 RELATED STANDARDS

SATRA TM 193, ASTM D5963. DIN 53516, EN ISO 20344 – 8.3, ISO 4649, AS/NZS 2210.2 – 8.3, JIS K6369 etc.

 

Product Details:

OVERVIEW

Whole shoe flexing tester is used to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexibility resistance or indicating the cracks of shoe or sole so through reciprocating flexing movements under the specified angle and frequency

PARAMOUNT Whole shoe flex tester i9™ is an ergonomically designed Equipment with sturdy mechanism to get Accurate & Reliable Results. It is designed for measuring the resistance of shoes of all kinds to flex. It determines the fatigue durability and service life of shoes by simulating the walking state of a person .this machine features simple operation, reasonable design ,rigidity and durability , low noise, and easy maintenance. A digital, microprocessor-based control panel with digital display. The equipment is beautifully finished in Blue Metallic paint for modern aesthetics.

SALIENT FEATURES :

• To Determine the Flexing endurance of a Complete Footwear : Formal Shoes, Sports shoes, Canvas shoes etc. thru reciprocating ­flexing movements under specified angle and frequency.
• It simulates the fl­exing of footwear during wear and can predict the failure of footwear in actual wear
• Equipped with acrylic protective cover which makes sure of safe operation and low noise
• Heel fixture using linear slide for smooth movement with little resistance
• Freely set running times and machine automatically stops after the test is finished
• Ø Speed control knob given for speed control
• Sturdy & Ergonomic Equipment for Accurate & Reliable Results.
• 4 Samples can be tested at a time
• Precision Engineered components for continuous operations
• Adheres to National & International Standards

TECHNICAL SPECIFICATIONS

• Test Sample : Test 4 samples simultaneously
• Bending angle: 0-90???(adjustable)
• Test speed: 0-50???, Adjustable speed range 60~230???cpm                    50-90???, Adjustable speed range 60~140???cpm
• Power supply : 220v 50/60HZ 3A
• Counter: Programmable 8 digits DIGITAL Counter
• Overall Dimensions: LENGTH x DEPTH x HEIGHT                                   950mm x 700mm x 820mm                                                  37.4” x 27.5” x 32.2”
• Net Weight: 223kg (490lbs)

 

 

 STANDARD ACCESSORIES :

1. Main Unit : 01 No.
2. Heel clamp : 01 Set
3. Spanner : 01 Set
4. Detailed User Manual : 01 No.
5. Calibration Certificate : 01 No.
6. Inspection & Conformance Certificate  : 01 No

Product Details:

OVERVIEW

Out-soles of footwear may suffer cracking due to flexing in actual use. Cracks usually develop at points of high surface strain. The Belt Flex Tester is designed to flex complete soles with their patterns intact in a way similar to flexing in actual use. Tests carried out using it provide a guide to the risk of such cracks developing during use.

Paramount BATA BELT Flex Tester i9™ is an ergonomically designed Equipment with sturdy mechanism to get Accurate & Reliable Results. It is an advanced Equipment used to check shoe sole Cracking due to Flexing in actual usage. The test specimens are attached to the outside of a continuous belt, which is driven round two rollers. The larger roller drives the belt while movement of the belt round the smaller roller provides the main flexing action. The radius of the smaller roller is chosen to make the flexing somewhat more severe than in actual use. This form of flexing also copies the wear conditions at each step as it produces a short period of rapid flexing followed by a longer period when the specimen is not being flexed. A normal test consists of a number of flexing runs up to a total of 50,000 flexes, with an examination for cracking at the end of each run. The apparatus is finished in blue Powder Coated Paint to give it a corrosion resistant finish

SALIENT FEATURES :

• To determine accurately the risk of Cracking of Shoe Soles due to Flexing in actual Wear.
• The equipment simulates the Actual Walking of a person to determine the resistance of the outer Sole specimen to ­flexing.
• Supplied with three flexing rollers, one for standard test the second for very flexible sole unit and the third for very rigid sole unit
• The unit is fitted with an acrylic front cover which acts as a safety guard along with the view of the samples being tested
• The unit works only when the acrylic cover is closed, for safety of the user
• A six-digit programmable electronic counter with memory backup and an inductive sensor is provided to count the total numbers of flexes undergone by the test specimens mounted on it
• Auto Stop Function: The motor stops automatically on completion of the set numbers of cycles.

TECHNICAL DETAILS 

• Dimensions of driving roller :  225 ± 5mm diameter x 170 mm ± 20 mm long
• Dimensions of flexing roller:  For Standard Test (for typical sole unit)
•  90.0 ± 0.5 mm diameter at centre, 87 ± 1 mm diameter at ends ,70 ± 20  mm long
• Canvas Belt Size: Length : 1930 ± 50mm Width : 140 ± 5 mm
• Belt Rotation Speed: 90 ± 8 Cycles per Minute
• Counter: Programmable 6 digits DIGITAL Counter
• Fixing Sample to be Tested on Belt: Max. 6 Soles
• Flexing cycles per minute :  90 ± 8 cycles / minutes
• Overall Dimensions: LENGTH x DEPTH x HEIGHT 1400mm x 700mm x 1370mm                            55.1” x 27.5” x 53.9”
• Net Weight of the Instrument: 194 kg (426 lb.)

 

STANDARD ACCESSORIES :

1. Main Unit: 01 No.
2. Roller: 03 No.
3. Detailed User''s Manual: 01 No.
4. Calibration Certificate: 01 No
5. Inspection & Conformance Certificate: 01 No.

RELATED STANDARDS: SATRA TM 133                                

Product Details:

OVERVIEW

Bennewart Flex Tester allows determining the resistance of a sole to the growth of a cut during repeated flexing. It is designed for the assessment of complete bottom constructions (including midsoles and insoles).  It can also be used to assess the effect of surface patterns on crack initiation and growth. This test is especially applicable to the outsoles of footwear but may also be used with certain other flexible components.

Paramount Bennewart Flex Tester i9Ô is an ergonomically designed Equipment with sturdy mechanism to get Accurate & Reliable Results. It consists of a drive unit comprising an electric motor with pulleys and belts and link mechanism to give an oscillating movement to one of the two grips holding the two ends of the test specimen, the other grip being fixed. The oscillating grip has gun metal bushes, which slides on two hardened and ground bearing steel rods to give it a long working life. Each grip consists of swayable bases pivoted on ball bearings so that the two ends of the test specimen are free to align themselves with the natural contour of the specimen during flexing. A six-digit pre-set electronic digital counter the numbers of test cycles and also stops the motor after pre-set numbers of test cycles. The apparatus is finished in Blue Powder Coated Paint.

 SALIENT FEATURE

 

• To Determine the Flexing Resistance of Shoe Outsoles, to cut growth, during repeated fl­exing, at a certain speed and angle.
• To Test the outsole, an incision or Holes are plunged in the outsoles, at the maximum bending position, and after specified test cycles, the incision length or the cut growth is checked to find the ­flexing resistance.
• Sturdy & Ergonomic Equipment for Accurate & Reliable Results.
• 2 Samples can be tested at a time
• Precision Engineered components for continuous operations
• Adheres to National & International Standards

 STANDARD ACCESSORIES

1. Main Unit : 01 No.
2. Detailed User''s Manual: 01 No.
3. Calibration Certificate: 01 No
4. Inspection & Conformance Certificate: 01 No.

 TECHNICAL DETAILS

• Number of specimen test: 2 for full sole, 6 for cut test specimen
• Flexing Speed: 140 Cycles per Minute
• Angle of flexing: 90°
• Diameter of bending mandrel: 30 mm
• Frequency of operation: 125 to 150 cycles/minute
• Motor: 1/2 HP, single- phase 230V AC
• Counter: Programmable 6 digits DIGITAL Counter
• Overall Dimensions: LENGTH x DEPTH x HEIGHT                                         1050mm x 425mm x 550mm                                               41.3” x 16.7” x 21.6”
• Net Weight of the Instrument: 80 kg (176 lb.)

 

 

RELATED STANDARDS : SATRA TM 161, ISO 17707, DIN 53543 etc.

Product Details:

 

OVERVIEW

The Ross Flex Test gives a measure of the resistance of sole material to cracking resulting from flexing in wears. The material is repeatedly flexed through 90º over a mandrel at a specified temperature after a small cut has been made right through with a chisel. The rate of growth of this cut is a measure of the tendency of the material to crack.

Paramount Ross Flex Tester i9™ is an ergonomically designed Equipment with sturdy mechanism to get Accurate & Reliable Results. It consists of an arrangement to repeatedly bend the test specimens around a mandrel by an angle of 90º at the specified frequency at a specified temperature. The specimen grip has provision for holding three pairs of test specimens at a time. The grip is pivoted on bearings to give a smooth angular movement. This movement of the grip causes the test specimens to bend over a mandrel rod with its axis coinciding with the axis of movement of the grip. An electronic preset digital counter with backup memory is provided to record the total numbers of bending cycles and to stop the machine after a pre-set number of bending cycles.

 

SALIENT FEATURES :

 

• To Determine the resistance of Non-leather Shoe Soles to Cracking in wear due to ­flexing.
• Very useful for Rubber products, Shoe Soles, PU, PVC, Foam to measure the degree of damage, cracking and reduced decline with continuous stretch and bending.
• Sturdy & Ergonomic Equipment for Accurate & Reliable Results.
• 12 Samples can be tested at a time
• Precision Engineered components for continuous operations
•  Adheres to National & International Standards

 

TECHNICAL DETAILS

• Numbers of test specimens: 12 (6 Sets)       that can be tested at a time
• Angle of bending: 90°
• Radius of bending: 5 mm
• Frequency of flexing: 1.0 ± 0.1 Hz
• Flexing Speed: 60 – 100 Cycles per Minute                                ± 3 cpm (Adjustable)
• Initial width of cut: 2 mm
• Counter: Programmable 6 digits DIGITAL Counter
• Overall Dimensions: LENGTH x DEPTH x HEIGHT                                          800mm x 425mm x 450mm                                   31.4” x 16.7” x 17.7”
• Net Weight of the Instrument: 60 kg (132 lb.)

 

 

 

  

STANDARD ACCESSORIES :

1. Main Unit                                                 : 01 No.
2. Detailed User''s Manual                              : 01 No.
3. Calibration Certificate                                : 01 No
4. Inspection & Conformance Certificate           : 01 No.

Product Details:

OVERVIEW

The ability of materials like shoe uppers leathers, gloves, furniture leather, car interior decorative leathers and garments, to withstand repeated flexing without cracking is determined with the help of a flexing resistance test. In this test, rectangular specimens are folded and clamped at each end to maintain them in a folded position in a set of grips, one of which is fixed while the other is able to oscillate. The movement of the oscillating grip causes the fold in the test specimen to run along its centre. This operation is carried out repeatedly and the test specimens inspected periodically to assess the damage produced. The equipment used for this test is Bally Flex Tester i9™.

PARAMOUNT Bally Flex Tester i9™ is an ergonomically designed Equipment with sturdy mechanism to get Accurate & Reliable Results. Test specimens are held between a pair of stationary and oscillating grips. Motion to the oscillating grips is given through a link mechanism, which oscillates the shaft on which the grips are mounted. All the pivot points of the mechanism have ball bearings to ensure smooth operation and a long working life. The link mechanism gives motion from an electric motor and two sets of V-pulleys. A four-digit electronic counter with key-reset and backup memory is provided to record the total number of flexing cycles undergone by the test specimens. The apparatus is finished in bright chrome / zinc plating and Shore Blue Metallic painting to give it a corrosion resistant finish.

SALIENT FEATURES : 

• To determine the Flexing Endurance of Light Leathers or Resistance of any material to cracking at flexing creases. Also informs the tendency of Cracks being formed in the creases caused by walking
• Useful for ALL Flexing material like Leather, Coated Fabrics, Textiles used in footwear Uppers.
• Sturdy & Ergonomic Equipment for Accurate & Reliable Results.
• 12 Samples can be tested at a time
• Precision Engineered components for continuous operations
• Adheres to National & International Standards

 STANDARD ACCESSORIES :

1. Main Unit: 01 No.
2. Specimen Template: 01 No
3. Detailed User''s Manual: 01 No.
4. Calibration Certificate: 01 No
5. Inspection & Conformance Certificate: 01 No.

 TECHNICAL DETAILS :

• Flexing Angle: 22.5° ± 0.5°
• Flexing speed: 100 ± 5 cycles/Flexes per minute
• Dimensions of test specimens: 70 x 45 mm
• Maximum number of test specimen  : 12
• That can be tested at one time
• Counter: Programmable 6 digits DIGITAL Counter
• Display: LCD display
• Motor: ¼ HP single-phase 220 volts 20Amp
• Overall Dimensions: LENGTH x DEPTH x HEIGHT                                         1100mm x 715mm x 390mm                                                43.3 x 28” x 15.3”
• Net Weight of the Instrument : 72 kg (158 lb.) 

RELATED STANDARDS :

SATRA TM 55, ISO 5402-1, ISO 17694,EN 13512, GB/20991, AS/NZS 2210.2 : ISO 32100, DIN 53351, ASTMD 6182 & More

Product Details:

OVERVIEW

Vamp Flex Tester double creases similar to those formed in the upper of a boot during wear are generated repeatedly in specimens of poly (vinyl chloride) upper material by means of a suitable apparatus until cracking of the poly (vinyl Chloride) upper material is observed or until the test pieces survive a specified number of flexure cycles.

Paramount  Vamp Flex Tester i9™ is an ergonomically designed Equipment with sturdy mechanism to get Accurate & Reliable Results. It consists of specified size of pairs of V-shaped clamps suitably mounted so that the axis of each pair are in the same straight line. The tips of each V-clamp are rounded to a specified radius. The number of flexing cycles is indicated and control by the digital preset counter.

 SALIENT FEATURES

• To determine the propensity for materials to Crack or otherwise fail at ­flexing creases. Equally suitable for testing leather, plastic coated fabrics, woven fabrics to test seam construction during ­flexing.
• In particular the test simulates conditions in the vamp Part of footwear during walking. Vamp is the arched upper surface of the human foot between the toes and the ankle.
• Sturdy & Ergonomic Equipment for Accurate & Reliable Results.
• 4 Samples can be tested at a time
• Precision Engineered components for continuous operations
• Adheres to National & International Standards

 STANDARD ACCESSORIES

1. Main Unit:  01 No.
2. Detailed User''''s Manual:  01 No.
3. Inspection & Conformance Certificate:  01 No.

 TECHNICAL DETAILS

• No. of sample test at a time: 4
• Sample size: 64 × 64mm
• Angle of each V-clamp: 40° ± 1°
• Radius of Tip of V: 6.4 ± 0.5mm
• Clamp: 40° V shaped
• Flexing Speed: 300 ± 30 Cycles per Minute
• Counter: Programmable 6 digits DIGITAL Counter
• Speed of Clamp: 300rpm & 90 rpm
• Motor : ½ HP, 220V AC single phase induction motor
• Power: 500W, 220 VAC single phase
•  Overall Dimensions: LENGTH x DEPTH x HEIGHT                                          1020mm x 600mm x 620mm                                               41.3” x 16.7” x 21.6”
•  Net Weight of the Instrument: 70 kg (154 lb.)

 

 

 

 RELATED STANDARADS

 SATRA TM 25, ISO 5423 – 5.2, EN ISO 20344 – 6.5.2, EN ISO 22288,

 

ISO 5402 -2 etc. 

 

Product Details:

OVERVIEW

TABER Abrasion Tester is meant to perform accelerated wear testing. The Equipment is Capable of providing reliable data in a few minutes compared to the years that may be required by in-use testing, Abrasion Tester is used to test a wide spectrum of materials including plastics, coatings, laminates, leather, paper, ceramics, carpeting, safety glazing, etc.

Paramount Taber Abrasion i9™ is an Advanced model Equipment to measure the wear resistance of material through Abrasion mounting a flat specimen approximately 100mm square or round to a turntable platform that rotates on a vertical axis at a fixed speed. The standard material thickness that can be evaluated with the Rotary Abraser is 6.35 mm (materials greater than 6.35 mm but less than 40 mm can be tested with optional accessories). Two abrasive wheels, which are applied at a specific pressure, are lowered onto the specimen surface. Characteristic rub wear action is produced by contact of the test specimen against the sliding rotation of the two abrading wheels. As the turntable rotates, the wheels are driven by the sample in opposite directions about a horizontal axis displaced tangentially from the axis of the sample. One abrading wheel rubs the specimen outward toward the periphery and the other, inward toward the center while a vacuum system removes loose debris during the test. The wheels traverse a complete circle on the specimen surface, revealing abrasion resistance at all angles relative to the weave or grain of the material .

 SALIENT FEATURES:

• To Determine the Wear Resistance of material thru Abrasion and also to measure the Wear resistance degree like Mass Loss, Thickness Loss etc.
• Highly suitable for Flat products like Suitcases, Carpet, Leather, Cardboard, glass, /plastics, traffic Paints, Automobile Interior etc.
• Sturdy & Ergonomic Equipment for Accurate & Reliable Results.
• Precision Engineered components for continuous operations
• Adheres to National & International Standards

 

STANDARD ACCESSORIES

 

1. Main unit: 01No.
2.  Detailed User's Manual: 01No.
3. Inspection & Conformance Certificates: 01No.
4. Calibration Certificates: 01No.

 TECHNICAL DETAILS

 

• TAT-001: Rotary Abrasion Tester
• Specimen: Φ108mm,thickness 3mm
• Load: 250,500,1000g
• Grinding wheel: Φ50.8mm, 12.7mm
• Space between wheels: 63.5mm
• Grinding wheel and Plate’s space: 37-38mm
• Grinding wheel: Φout diameter 88.9mm,            inside diameter 63.5mm
• Rotating speed: 60r/min,72r/min
• Counter : LCD.0- 999.999
• Distance in specimen : 3mm
• Overall Dimensions : 55x32x32cm
• Weight : 20kg

RELATED STANDARDS : SATRA TM 163, ASTM D3884. ASTM D1175, ASTM D4060, TAPPI T476, JIS K 7204, DIN 52347 etc. etc.

Product Details:

OVERVIEW

Muffle Furnace is an oven type equipment that can reach a very high temperature. The use of a muffle furnace is to burn off specific types of compounds. For instance, for a standard determination of the amount of inorganic components within an object, a muffle furnace can be used to burn of all the organic material (which is roughly said always greater than 900°C). It principle thereof is plainly to auto-ignite the organic material, due to high temperatures. It is highly suitable device which is used for checking the ash content of polymers. It is completely insulated with imported insulation and fire bricks.

Paramount Muffle Furnace is an ergonomically designed Equipment with sturdy mechanism to get Accurate & Reliable Results. It incorporates a host of user-friendly controls which make working with it easy and comfortable. Industrial Lab muffle furnaces are specially designed to suit ISO & ASTM Standard. It is applied in growing fields of Medical research, agricultural, industrial, metal treatment, ash determination & wool industries

 SALIENT FEATURES

• To Determine the % of Ash Content in Polymers, rubber, elastomers etc.
• Latest design Equipment with easy installation                    
• Easy to use & Low maintenance.
• PID temperature controller makes temperature control easy.
• Latch type door handles do not let hot air escape.
• Sturdy & Ergonomic Equipment for Accurate & Reliable Results.
• Precision Engineered components for continuous operations
• Adheres to National & International Standards
• Supplied complete with Calibration Certificate (Traceable to NPL).

TECHNICAL SPECIFICATIONS

• Power Supply: 220/230 V,  single Phase, 50/60 Hz, AC Supply
• Temperature range: 0 to 900???C
• Temperature least count: 1 degree °C     
• Temperature sensor : J TYPE
• Timer: Timer set preset value up to 99.99hours
• Chamber Internal size (mm): 4??× 4??×9??                  

STANDARD ACCESSORIES

1. Main Unit : 1 No.                                 
2. woolen gloves : 1 Set
3. Crucible : 1 No.
4. Detailed User’s Manual: 1 No.
5. Calibration Conformance Certificates: 1 No.
6. Inspection & Conformance Certificate: 1 No

Product Details:

Backed by rich industrial experience we are offering sub zero climaste chamber i9 to our customers providing the best services to our customers at reasonable rates

Product Details:

Latest model Twin Unit Hot Air Oven for Textile incorporating German Technology. Oven Temperature Ambient to 250C. With sensitivity Of 1^oC. Inside Chamber made of Stainless Steel. Advance Digital Displays, Exclusive feature Three blowers-One to keep the outer body cool, Second to keep the door Cool & third to keep temperature inside the Chamber completely uniform. Exclusively used for Perspiration and Oven-Dry tester with high accuracy. 18 inch cubical inner chamber provides enough space.

International standards

• AATCC 15, 106, 107 | ISO 105 E02, E01, E04